We know what it takes to be productive, efficient, and reliable and that’s exactly what we at TYRI will help you to achieve. We also fully understand the need for customization, for e.g. not every operator has the same eyesight or sensitivity, or has the same working experience when it comes to choosing the working setup of the lighting of the machine. We know it is therefore imperative that our products are easy to use and understand in order to get the best out of them.
Imagine that all of the above comes as standard, that’s how dedicated we are to supplying you with only the best. Take for example the INTELLilight®, this state-of-the-art smart lighting solution which has taken work lights to a whole new dimension. The possibilities are endless.
The halogen lights used in the roof of this tractor needed be replaced by LED. Adaptations were made to allow the 1010 Recess work light to be used safely and effectively. Additionally, 1010 work lights with 3200 effective lumen were used on the A and B pillars.
1010 BlueBeam are powerful lights, with a wide beam pattern for sprayers. Along with the bright blue colour, the BlueBeam serves a practical purpose, ensuring operators of crop sprayers to have full visibility of the nozzle spray.
Seeding machines from Horsch are equipped with TYRI 0606 Diffused work lights. These lights have a very wide light distribution and do not reflect on metal, water and snow. Ideal for use in short distances, provide perfect soft illumination and are suitable for space-confined areas.
1010 BlueBird with blue LED light helps to retain tranquillity in poultry facilities. Designed with a targeted asymmetric lens, the 1010 BlueBird minimises the spread of light to reduce glare and irritation to the eye.
TYRI LED 0909, with a wide symmetric light pattern provides a homogeneous illumination in front of the tractor to help farmers when ploughing snow.
INTELLilight® with the ability to change colour temperature from 2700 K to 6500 K and automatic dimming function is ideally suited also for agricultural machines to solve lighting problems in difficult weather conditions such as snow and dust.
EMC EN55025 / CISPR 25It is of vital importance, especially on emergency or military vehicles, that lighting does not affect control systems, cameras, on-board computers and other radio sensitive equipment. This is why TYRI lights are scrutinised to ensure they do not interfere with EMC functionality.
IP 69KIP 69K ratings offers complete peace of mind that the work light you are installing has undergone rigorous tests to ensure it is both durable and conforms to the highest standards on the scale of protection against water, moisture and dust ingress.
Vibration testingTYRI lights undergo extensive vibration testing, for up to 8 hours on all axes, above 10 Grms at a frequency range from 5 – 2000 Hz. This simulates the forces applied to the lights once mounted on off highway machines.
Salt spray testingTYRI lights undergo rigorous salt spray testing to ensure they are approved to ASTMB117 standards. This ensures that even in corrosive environments, TYRI lights will continue to perform.
Shock testingAs well as vibration testing, TYRI lights undergo shock testing to a force of 50G. This ensures that TYRI lights will withstand punishment from your work environment.
Environmental testingTYRI lights tested in hot and cold temperatures, as well as humidity, for a minimum of 50 days. They are tested in conditions up to -40C° to +85C° and up to 90% humidity.
TYRI lights have built in temperature sensing circuits which reduce the output to regulate the temperature of the light. This prevent damage to the LED’s that can result in premature failure. TYRI LED lights are also reverse polarity protected in the event of incorrect installation. Should the wires become crossed during connection, TYRI lights will not turn on until the wires have been connected in the correct configuration, protecting the LEDs and associated circuitry.
https://tyrilights.com/wp-content/uploads/2023/02/sprayer-image.jpg
843
1500
peo
https://tyrilights.com/wp-content/uploads/2019/06/tyri_logo-1.png
peo2019-08-28 11:28:212019-08-28 11:28:21Helping Operators in the Field
https://tyrilights.com/wp-content/uploads/2023/02/lighting-OEM2.jpg
843
1500
peo
https://tyrilights.com/wp-content/uploads/2019/06/tyri_logo-1.png
peo2019-07-10 11:42:152019-07-10 11:42:15Lighting OEM Designs
https://tyrilights.com/wp-content/uploads/2023/02/EMC-testing-3.jpg
843
1500
peo
https://tyrilights.com/wp-content/uploads/2019/06/tyri_logo-1.png
peo2019-07-10 11:38:182019-07-10 11:38:18EMC Testing In-House
https://tyrilights.com/wp-content/uploads/2023/02/TYRI_Its-all-in-the-details.jpg
843
1500
peo
https://tyrilights.com/wp-content/uploads/2019/06/tyri_logo-1.png
peo2019-06-14 11:44:202019-06-14 11:44:20It’s all in the details
